How do I make sure every small purchase gets charged to the right job?
By the Truceipts team · Published · Updated
Put the job on the receipt the same day, then tag the charge itself in QuickBooks or log it as an expense on the job in Jobber or Housecall Pro. Split mixed tickets. A statement payment, a cash run, and a van part nobody logged still leave the job empty.
This is the capture habit for a 5-to-15 tech HVAC, plumbing, or electrical shop on Jobber, Housecall Pro, or Workiz.
What counts as a small purchase
A small purchase is any buy that never got a purchase order. A Home Depot run after hours. An Amazon order to the shop. A counter pickup on a tech’s card. Cash at the hardware store. The leak is that it never hits a job.
| Purchase | Where it shows up | Job tag? |
|---|---|---|
| Home Depot or Lowe’s swipe | Credit card feed | Yes, on the charge |
| Mixed receipt | One swipe, two tickets | Yes, split by line |
| Supply-house counter ticket | Card or charge account | Yes, on the charge or the bill |
| Amazon or online parts | Card feed, often days later | Yes, if it went on a job |
| Truck stock, capacitor, wax ring, fittings | The van | Only if someone logs quantity used |
| Cash, Venmo, petty cash | Nowhere, or a reimbursement | Only if someone enters it |
| Statement payment, annual fee, interest | Checking or the card | No. That is not a job cost |
| Fuel, shop tools, restock with no job | Overhead | Almost never |
On r/estimators, shops said you cannot catch every last consumable. They plug an allowance for unknowns and fold tape, wire nuts, and small fittings into markup. Job costing still needs the buys that belong to one ticket: the extra breaker, the after-hours drier, the mixed Home Depot run. How to track material costs per job for an electrical contractor covers van parts and leftover wire.
Name the job before the truck leaves
The card feed knows the vendor and the amount. It does not know the job. On r/ServiceTitanFAQ in January 2026, a shop running ServiceTitan and QuickBooks put the failure mode in one line: charges come in fine, and job assignment is the missing piece. Wait a week and the context is gone. On r/GeneralContractor in March 2026, crews said write the job code on the receipt before anyone gets back in the truck.
Three habits make the later tag possible:
- One card per tech. “Luis’s card, 2pm Wednesday” narrows a Lowe’s swipe to one or two tickets. A shared shop card is a pile of guesses.
- Job address or job number in the PO field. Ask Ferguson, Johnstone, CED, and the Home Depot Pro desk to print it. Jobber’s supplier invoice scanning looks for that number in the PO, reference, or notes, then you approve the draft. A blank PO is the usual miss.
- Receipt onto the job the same day. In Jobber, log an expense from the job or the app and attach the photo. Jobber’s expenses help (updated 2026-10-28) is that path. On Plus, receipt capture in the app fills details from the photo. In Housecall Pro, turn on material and miscellaneous job inputs under Settings, Jobs, Costs and Materials, per the setup guide dated 2026-07-22.
Cash skips the feed. Photo, job, amount, same day, then reimburse. A Venmo with no ticket is overhead until someone names the job.
Tag the charge, not the statement
QuickBooks Online reports profit per job when Projects are on, which Intuit’s help (updated 2026-10-06) puts on Plus, Advanced, and Intuit Enterprise Suite, and when Customer/Project is filled in on the charge. Jobber’s job costing help (updated 2026-10-29) subtracts timesheets, unit costs, and expenses logged on the job. Logging a Home Depot expense in Jobber does not fill the QuickBooks project.
Do this on the card. Assigning credit card expenses to jobs is the full click path. Open Bank transactions, pick the credit card, open a posted charge on the Pending tab, confirm payee and category, pick the job in Customer/Project, then Post. Intuit’s categorize help (updated 2026-08-24) is that path. If the row says Match, change it to Categorize unless you already entered the expense by hand.
The monthly payment is the mistake shops make most. Intuit’s pay-down help (updated 2026-08-05) uses Pay down credit card or a Credit Card Payment match. Paying Visa is a transfer. Code that payment to Materials and you double-count every swipe.
Supply-house invoices on a charge account are a bill. Matching supply-house invoices to jobs is that path. Enter each invoice when it arrives, with Customer/Project on every line.
Split one receipt across two jobs
A tech who grabs parts for Elm Street and Oak Avenue on the same Home Depot ticket posts one amount. Until you split it, both jobs are wrong. On the Pending tab, open the charge, switch Match to Categorize if needed, select Split, and put category, amount, and Customer/Project on each line until Difference is $0. In Jobber, log two expenses. A return credit gets the same job as the original swipe.
The weekly check that shows what leaked
On Monday, pull last week’s closed jobs from the field-service app and lay them next to the card feed, the supplier inbox, and the receipts in the techs’ phones.
| Check | Pass | Fail |
|---|---|---|
| Closed jobs vs card swipes | Each Home Depot and supply-house charge has a job, or a split | Charges sit in Materials with a blank Customer/Project |
| Mixed receipts | Lines add to the ticket total | One job ate both addresses |
| Statement payment | No job tag | The whole Visa dump sits on one ticket |
| Van parts | Capacitor, wax ring, or breaker logged as an input or expense | The job looks fat and the truck is empty |
| Cash and reimbursements | Photo, job, and amount entered | A Venmo or envelope never hit a job |
| Returns | Credit on the same job as the buy | A return posts as income, or to no job |
Anything with no job at the end of the week is still missing. Keep an uncoded list and clear it while people still remember the ticket.
Intuit’s bank-rules help (updated 2026-08-05) can fill payee, category, customer, and project, and can auto-post. A rule is right for a monthly dumpster on one remodel. It guesses on Home Depot. Leave auto-add off on supply-house cards.
Jobber’s help (updated 2026-10-29) counts a $500 line-item cost and a $500 expense for the same material as $1,000. If you logged the Home Depot run as an expense and also stored a unit cost on the line, the profit bar is double-counted.
A part off the van never hit the card. Housecall Pro’s material job inputs are built for that on flat-rate work. Cash never downloads. Jobber and Housecall Pro push invoices and payments. They do not push card swipes onto a QuickBooks project. How to do job costing in QuickBooks Online is the setup when every ticket dumped under one customer. ServiceTitan’s job costing flyout, read 2026-11-01, breaks out materials, equipment, purchase orders, commissions, and labor burden. The vendor bill still has to carry the PO.
Four ways shops actually keep small purchases on jobs
1. Run the feed as designed
Stay on QuickBooks Online Plus. Projects on. Customer/Project on every charge the same week. Split mixed receipts before you reconcile. Log van parts in the field app the same day. It breaks the first week nobody tags.
2. Make the receipt name the job
One card per tech, job address on every PO, photo snapped onto the job before the truck leaves. The office is matching, not reconstructing Friday from memory.
3. Hire a job-costing VA
Job posts for the role ask someone to assign 5 to 10 transactions a day to the right job by property address. Offshore listings for that work commonly run about $800 to $1,100 a month. Those figures come from job posts and listings, not a wage survey. A person can split a receipt and chase a credit with no PO. Should I hire a virtual assistant to do job costing? is that hire.
4. Use software that tags from the FSM and the bank feed
Clyr sits between the card you already issue and the books. A tech swipes. Clyr texts them. They reply with a photo. Clyr’s home page, read 2026-11-01, connects Amex, Visa, and Mastercard at 16,000-plus institutions. The dollar amount is on the quote. It wins the text-after-swipe. It stops when the tech ignores the text, and on a mixed ticket that still needs a split. A newer set of tools leaves the FSM and QuickBooks in place and matches card swipes, supply-house bills, timecards, and sub invoices to a job using tech, time, address, and supplier. Anything they cannot place goes to a short exception list. We make Truceipts, which does this, so weigh that suggestion accordingly. Software that tags expenses to jobs automatically compares the options.
How to tell this week
You know small purchases are landing when last week’s closed jobs show the Home Depot runs and counter tickets, mixed receipts are split, the statement payment has no job tag, van parts are logged, and the uncoded list is empty on Monday. If the project overview shows revenue and almost no material, the swipes were never tagged.
Pull last week’s ten closed jobs from Jobber, Housecall Pro, or Workiz. Lay each one next to the card charges in QuickBooks, the receipts in the techs’ phones, and the van log. Start with those three files. They already exist.
Frequently asked questions
Can a QuickBooks bank rule send every Home Depot swipe to the right job?
A rule can fill payee, category, and even a customer or project, per Intuit's bank-rules help updated 2026-08-05. Auto-add posts without review. That helps when one vendor always belongs to one job. A Home Depot swipe changes jobs every day, so a rule that auto-posts those charges will guess. Leave auto-add off on supply-house cards.
Should I assign the monthly credit card payment to a job?
No. The payment is a transfer from checking to the card, not a new expense. Intuit's pay-down help, updated 2026-08-05, uses Pay down credit card or a Credit Card Payment match in the bank feed. Tagging the payment dumps the whole statement onto one job and double-counts every swipe you already posted.
How do I cost a part that came off the van?
Log quantity used on the job the same day as a material line, a Jobber expense, or a Housecall Pro material job input. Housecall Pro's setup guide, dated 2026-07-22, built those inputs for van parts on flat-rate work. If nobody records the capacitor or wax ring, the job looks fat and the truck empties. Fold tape and small fittings into markup.
Do I need to mark a small purchase billable to job-cost it?
No. Billable puts the cost on the customer's next invoice. Profit by job only needs Customer/Project filled in on the charge, or the expense logged on the job in the field app. On flat-rate work, leave Billable off so you do not invoice parts already in the price.
What if one Home Depot receipt covers two jobs?
Split it. In QuickBooks, open the charge, switch Match to Categorize if needed, select Split, and put category, amount, and Customer/Project on each line until Difference is $0. Intuit's categorize help, updated 2026-08-24, is that path. In Jobber, log two expenses. Until you split it, both jobs are wrong.