Why do my plumbing jobs look profitable but I have no money at month end?

By the Truceipts team · Published · Updated

A plumbing job’s profit and the bank balance measure different things. Profit is the invoice minus costs tagged to that job. Cash is what actually cleared. Unpaid invoices, parts paid up front, callbacks, and overhead that never hits a ticket can empty the account while every job still looks fat.

This guide covers the usual causes a 5-to-15 tech plumbing shop on Jobber, Housecall Pro, or Workiz can check this week, and which ones are timing versus a job that never made that money.

Profit on the job is not cash in the bank

IRS Publication 538 (revised January 2022, read 2026-10-09) splits the two clocks. Under the cash method you report income in the year you receive it and deduct expenses in the year you pay them. Under the accrual method you report income in the year you earn it, “regardless of when payment is received,” and deduct expenses in the year you incur them, “regardless of when payment is made.”

A job-cost report in the field-service app, and a project P&L in QuickBooks, usually follow the work. The checking account follows the money.

Number What it counts When it moves
Job profit Invoice minus costs tagged to that job When you close or invoice the ticket
Accounts receivable Work delivered, not yet paid When the customer actually pays
Cash in the bank What cleared When the deposit, card, or check posts
Overhead and draws Rent, trucks, insurance, tax deposits, owner pay On their own calendar, on no job

Timing, or the job never made that money

Some of these leave cash short while the money is still coming. Some mean the ticket was never as profitable as it looked.

Cause How to check this week Timing or real loss
Invoices sent, not paid A/R aging in QuickBooks, or unpaid invoices in the field-service app Timing, until it goes bad
Materials and equipment paid first Card feed and supply-house bills versus the job’s paid date Timing
Deposit or progress payment spent elsewhere Deposits on open jobs versus remaining costs on those jobs Timing, until you run out
Callback or warranty visit $0 invoices and warranty jobs in the FSM Real loss
Wage-only labor, no burden Labor on the job versus a fully burdened rate Real loss; the job was never that fat
Truck stock and drive time left off Van parts logged, timesheets versus billed hours Real loss
Owner draw, truck loan, insurance, rent Overhead on the P&L versus checking Not a job cost; cash left anyway
Sales tax and payroll tax held Tax liability accounts versus checking Not yours; it was always leaving

A typed example so the arithmetic is visible. These dollars are worksheet numbers, not a market rate.

Line Typed example
Water-heater swap, invoiced Friday $4,800
Tank and fittings on the card this week $1,650
Tech hours at wage only $420
Job profit in the field-service app $2,730
Customer payment Not yet
No-charge callback Saturday, hours and a part Off the original ticket
Payroll Friday The $420, plus burden, already left

$4,800 − $1,650 − $420 = $2,730 on the job. Checking is still waiting on the customer, and it already paid the tank and the tech.

Invoices sent, not paid

Intuit’s accounts-receivable guide (dated 2026-08-06, read 2026-10-09) defines accounts receivable as money customers owe for goods or services already delivered but not yet paid for. On accrual books that unpaid invoice is income. On cash-basis books it is not income yet. The bank does not have it on either method.

Residential service often collects on site. Larger replacements, property managers, and commercial work often go out as an invoice, sometimes on net 30. Plumbers on r/skilledtrades describe the split as pay-right-away or months of chasing. Net 30 on the invoice is a due date, not a deposit date.

How to check: open the A/R aging in QuickBooks, or unpaid invoices in Jobber, Housecall Pro, or Workiz. Sort oldest first. Match each open invoice to a closed job. If last week’s “profitable” tickets are still open, that profit is sitting in AR.

Jobs closed with no invoice never age. Pull those completed jobs and send the invoices.

Materials paid before the job pays

The tank, the fixture, and the extra fittings leave the account when you buy them. The customer pays when the invoice is due. That gap is timing. A mixed Home Depot swipe, or a supply-house bill before the job is finished, widens it.

How to check: for last week’s closed jobs, lay the card charges and supply-house PDFs next to the job’s paid date. How to assign credit card expenses to jobs in QuickBooks Online is the tagging path. A job that shows fat profit with no material cost usually paid the parts on the card and never tagged them.

A deposit or progress payment that covers the equipment closes this gap on that job. Spending one job’s deposit on another job’s payroll does not. A deposit is cash today. On the cash method, Publication 538 treats an advance payment as income when you receive it. The work, and the tank, may still be ahead of you.

Callbacks, burden, and truck stock

These are the rows where the job really lost money, or never made as much as the bar said.

Callbacks and warranty. A return visit that bills nothing still costs a tech hour, a part, and a truck roll. The original ticket keeps its profit. Put the callback hours and parts back on that job, or treat the callback as its own $0 job and look at the pair.

Labor at wage only. Payroll tax, workers’ compensation, the van, and unbilled drive time belong in the rate you put on the job. How to calculate the fully burdened labor rate for an HVAC technician is the same sheet for a plumber. A job that “made 40%” on wage-only labor still loses once those costs are in. Contractors on r/Contractor flag this as the reason a shop looks fine and then skips a payday.

Truck stock and drive. Elbows, wax rings, and connectors come off the van. Windshield time is paid. If nobody logs quantity used, and drive never hits the ticket, the job looks better than it was and the truck empties.

How to do job costing in QuickBooks Online is the tagging setup when the report is the books. Software that matches card swipes, supply-house bills, and timecards to the job from the field-service app can fill the hole where the job never counted those costs. We make Truceipts, which does this, so weigh that suggestion accordingly. It does not collect AR, hold tax money, or replace a cash forecast.

Money that never touches a job

Checking also pays things no ticket will ever carry.

Outflow What it is On the job?
Owner draw or owner payroll Pay to you No
Truck loan, shop rent, insurance Overhead on a schedule No
Sales tax collected Held for the state, then remitted No. It was never yours
Payroll tax withheld, plus the employer share Held, then deposited No. IRS Publication 15 (2026) and the employment-tax due dates (read 2026-10-09) put those deposits on a monthly or semiweekly calendar

A bookkeeper on X put the pile in one sentence: payroll money, tax money, vendor money, and owner money sitting in the same checking account. Profit can be real. The pile is still spoken for.

How to check: run last month’s P&L next to the bank rec. Circle owner draws, loan payments, insurance, sales-tax payments, and payroll-tax deposits. None of those make a water-heater swap unprofitable. All of them leave the account.

How to tell this week

You know which gap you have when last week’s closed jobs sit next to unpaid invoices, the card and supply-house bills, and the $0 callbacks. Open invoices are timing. Missing materials, burden, or callbacks mean the jobs were never that fat. Clean jobs and a dropped account point at draws, trucks, and tax deposits.

Pull last week’s ten closed jobs from Jobber, Housecall Pro, or Workiz. Lay each one next to the A/R aging, the card charges in QuickBooks, the supplier PDFs, and the warranty visits. Those files already exist. Start there.

Frequently asked questions

What is the difference between plumbing job profit and cash in the bank?

Job profit is the invoice minus the costs tagged to that job. Cash is what actually cleared. An invoiced water-heater swap can show profit the day you close it. The tank already left on the card. The customer has not paid. Payroll still hits Friday. Open last week's closed jobs next to unpaid invoices and the card feed.

If a plumbing invoice is unpaid, is that still profit?

On accrual books, yes until it is collected or written off. Intuit's accounts-receivable guide, dated 2026-08-06, defines AR as money customers owe for work already delivered. On cash-basis books, unpaid invoices are not income yet, per IRS Publication 538. Either way the bank does not have the money. Work the aging report.

Why does buying the water heater empty checking before the customer pays?

The supply house and the card get paid when you buy. The customer pays when the invoice is due, often later. That float is timing. Match the charge date to the job's paid date. A deposit that covers the tank closes the gap. Spending one job's deposit on another job's payroll does not.

Do warranty callbacks hide inside a job that still looks profitable?

Yes. A no-charge return visit still costs labor and the part. The original ticket keeps its profit bar. The callback is a second job with no revenue. Pull last week's $0 invoices and warranty visits from the field-service app and put those hours and parts back on the original job.

Should payroll tax and sales tax sit in the same checking account as job profit?

They should live in a liability, not in "profit." Sales tax you collected and payroll tax you withheld are money you hold, then remit. IRS Publication 15 (2026) requires employers to deposit withheld income tax and FICA on a monthly or semiweekly schedule. Mixing that cash with job profit makes a fat month look spendable until the deposit date.

Related

Request your spot

Month-to-month. No card needed today. Privacy