Can Expensify tag contractor expenses to jobs, and what does it cost?
By the Truceipts team · Published · Updated
Yes. Expensify can tag contractor expenses to jobs. After SmartScan fills merchant, date, and amount, you pick a tag for the job, crew, or phase. Collect is $5 per unique member a month. The tag lives in Expensify until export maps it to a QuickBooks customer or project.
This is the buy for a 5-to-15 tech HVAC, plumbing, or electrical shop that already runs Jobber, Housecall Pro, or Workiz on QuickBooks Online and is asking whether Expensify is the job-costing layer.
What an Expensify job tag actually is
Expensify’s construction page, read 2026-11-19, is the pitch. Tag expenses by job, crew, or phase. Snap a receipt, text 47777 from a US number, or forward to receipts@expensify.com.
Expensify’s tag help, read 2026-11-19, is the spec. Tags are classes, projects, cost centers, locations, customers, or jobs. Enable Tags on the workspace, then add them by hand, import a spreadsheet, or sync them from QuickBooks Online, Xero, NetSuite, or Sage Intacct.
| Step | What Expensify fills | What still needs a person |
|---|---|---|
| SmartScan | Merchant, date, amount | The job tag |
| Tag | A list of jobs, crews, or phases you set up | Someone picks the right one. Suggestions remember past merchants. They leave a manual tag alone. |
| Split | Separate rows from one swipe | Each row needs its own tag when Elm Street and Oak Avenue share a Home Depot ticket. |
| Export | The tagged expense into QuickBooks, Xero, NetSuite, or Sage Intacct | The tag has to match a live customer or project, or export fails. |
SmartScan reads the paper. It does not know which house the parts went to. Require tags, read 2026-11-19, on Collect or Control puts an orange dot on a blank tag. The expense can still be submitted.
On r/Construction in January 2025, a shop that used Expensify wrote you still scan at the counter and put a job number on the PO. Charging every small purchase to the right job is that same-day habit.
What Expensify costs
Prices are USD from Expensify’s pricing help, read 2026-11-19. Taxes are extra. Collect is month-to-month. Control annual is a 12-month commitment. You can raise the seat count during the term. You cannot lower it until renewal.
| Plan | Price | Who is billed | Job tagging | Accounting |
|---|---|---|---|---|
| Collect, pay-per-use | $5 per unique member/month | Every member on the workspace, even if they never scan | Single-level tags. You can require a tag. | QuickBooks Online, Xero |
| Control, annual | $18 per member in your subscription size/month, plus $36 per extra active member | The seat count every month, then extras who actually used it | Multi-level tags, tag GL codes, tag approvers | Collect’s connections, plus NetSuite and Sage Intacct |
| Control, annual with Expensify Card | As low as $9 per member in your subscription size | Same as Control annual. Discount up to 50 percent from the share of approved USD spend on the Expensify Card | Same as Control | Same as Control |
| Control, pay-per-use | $36 per active member/month, as low as $18 with the card | Active members only | Same as Control | Same as Control |
| Free Submit | $0 | Individual coding | Tags without company accounting | None |
A unique member is everyone on the workspace. An active member created, edited, submitted, approved, or exported expense data, or chatted with Concierge, per billing terms, read 2026-11-19.
Ten techs plus an office manager is eleven unique members. Collect is $55 a month if you add all of them, billed even if four never open the app. Control annual at eleven seats is $198 a month, or $99 with the full card discount. First workspace created before April 1, 2025 stays on legacy Collect, $5 annual or $10 pay-per-use per active member.
Compare Collect and Control, read 2026-11-19, puts multi-level approvals, multiple corporate card connections, custom expense rules, and SAML on Control. The Expensify Card works on both plans.
How the tag gets into QuickBooks
Connect to QuickBooks Online, read 2026-11-19, needs a Collect plan. QuickBooks Self-Employed is unsupported. Expensify’s table on that page puts Customers and Projects on Essentials and Essentials Plus, and off Simple Start. Intuit’s Projects help, updated 2026-11-10, puts Projects on Plus, Advanced, and Intuit Enterprise Suite. Confirm the plan you actually have.
Configure QuickBooks Online, read 2026-11-19, imports Customers/Projects as tags for expense-level coding. Company card expenses export as credit card by default, or as debit card or vendor bill. Auto-sync pushes newly approved reports. Old reports still need a manual export.
The tag has to match a live QuickBooks customer or project. ONL297 is a customer, project, or location tag that no longer exists on the workspace. ONL118 is a billable expense with no customer or project. A hand-typed tag that never came from QuickBooks fails the same way. Sync, then re-pick from the imported list.
Billable is a different field. It puts the cost on the customer’s next invoice. Profit by job only needs the customer or project tag. On flat-rate work, leave Billable off so you do not invoice parts already in the price. Assigning credit card expenses to jobs in QuickBooks Online is the feed path when you skip Expensify.
What you have to enter for the tag to be real
- Turn Tags on, then import the jobs from QuickBooks. Workspaces, the workspace, More features, Organize, Tags. Then Accounting, Sync now. Create expense tags help, read 2026-11-19, says tags imported from an accounting system start inactive. Turn on the jobs the crew actually runs.
- Require a tag. Workspaces, Rules, General, Require fields for all expenses, Tag. Workspace rules, read 2026-11-19, sit on Collect and Control. On Collect, that require-tag toggle and Billable expenses are the rules you get. Expense defaults that fill a tag by merchant sit on Control. A Home Depot default still guesses which house.
- Snap the same day, then pick the job. SmartScan, then the tag. Wait a week and “Luis, 2pm Wednesday” is a pile of guesses.
- Split mixed tickets before anyone approves. Split help, read 2026-11-19, lets each row carry its own category and tag. Company card splits have to add to the original amount.
On r/Construction in October 2024, a shop using Expensify wrote capture takes less than a minute and the hole is techs who will not do it.
Limits the tag still has
Expensify wins receipt capture and reimbursement when the crew picks the tag.
The Jobber ticket stays empty. Expensify’s construction page lists QuickBooks, Xero, NetSuite, and Sage Intacct. It does not list Jobber, Housecall Pro, Workiz, or ServiceTitan. Does Jobber have job costing? is the in-app profit bar. That bar subtracts expenses logged on the job in Jobber. An Expensify tag does not create that expense.
A required tag can still ship blank. Require tags shows an orange dot. Submission still goes through. The office catches it in review, or it does not.
A Control merchant default is still a guess on Home Depot. Expense-default rules that fill a tag from a merchant are Control. They help when one vendor always belongs to one job. A supply-house swipe changes jobs every day.
Truck stock never hits Expensify. A capacitor off the van never made a receipt. Software that tags expenses to jobs automatically covers the overlay when the hole is the untagged bank feed.
When Expensify tagging is enough
| Approach | When it holds |
|---|---|
| Run Expensify tags as designed | Crew snaps the same day, picks the job tag, QuickBooks Customers/Projects import as tags, and last week’s exports show the project |
| Stay on Jobber Grow or Plus | You already run Jobber. Jobber’s pricing page, read 2026-11-19, lists Grow at $229 a month billed annually for 5 users, with job costing on Grow and Plus. Plus is $399 a month billed annually for 5 users. Extra users $29 a month. |
| Tag every expense in QuickBooks | One or two trucks, and the owner sees every receipt |
| Overlay on the FSM you already run | Card swipes and supplier PDFs never land on the Jobber job, and you keep Jobber, Housecall Pro, or Workiz |
Stay on Collect when the crew will pick a single job tag and QuickBooks Online is the books. Use Control when you need job plus phase, more than one card feed, or NetSuite.
Best receipt tracking app for contractors that assigns receipts to jobs prices the capture stack. A newer set of tools leaves Jobber, Housecall Pro, or Workiz and QuickBooks in place and matches card swipes, supply-house bills, timecards, and sub invoices to a job using tech, time, address, and supplier. Leftovers go to a short exception list. We make Truceipts, which does this, so weigh that suggestion accordingly.
How to tell this week
You know it is working when last week’s closed jobs show the Home Depot photo with a job tag, mixed receipts are split, the export landed on the QuickBooks project, and the Jobber profit bar has the expense if you also logged it there. If Expensify is full of photos and QuickBooks projects show revenue with almost no cost, the camera worked and the tag did not export.
Pull last week’s ten closed jobs from Jobber, Housecall Pro, or Workiz. Lay each one next to the Expensify expenses tagged that week, the supplier PDFs, and the card charges in QuickBooks. Start with those three files. They already exist.
Frequently asked questions
How much does Expensify cost for a 5-to-15 tech shop?
Collect is $5 per unique member a month, pay-per-use, per Expensify's pricing help read 2026-11-19. Ten techs plus an office manager is eleven unique members, $55 a month, billed even if some never scan. Control annual is $18 per member in your subscription size, as low as $9 with qualifying Expensify Card spend. Taxes extra.
Does an Expensify job tag land on the Jobber job?
Expensify's construction page, read 2026-11-19, lists QuickBooks, Xero, NetSuite, and Sage Intacct. Jobber, Housecall Pro, and Workiz are off that list. The Jobber ticket still needs an expense logged in Jobber. [Does Jobber have job costing](/guides/does-jobber-have-job-costing) walks the profit bar those expenses feed.
Does Expensify fill the QuickBooks project by itself?
Expensify imports Customers and Projects from QuickBooks Online as tags, per configure help read 2026-11-19. Someone still picks the tag, then the report exports. A missing or stale tag fails export as ONL297 or ONL118. Intuit's Projects help, updated 2026-11-10, puts Projects on Plus, Advanced, and Intuit Enterprise Suite.
Which Expensify plan do I need to tag expenses by job?
Tags work on Collect and Control once Tags is enabled. Collect includes QuickBooks Online and Xero. Multi-level tags, tag GL codes, tag approvers, and expense-default rules that fill a tag by merchant sit on Control, per tag and rules help read 2026-11-19. The free Submit workspace skips accounting integrations.
What if one Home Depot receipt covers two jobs?
Split it. Open the expense, choose Split, and put category, tag, and amount on each row. Company card splits must add to the original total, per split help read 2026-11-19. Until you split it, both jobs carry the wrong cost. [Charging small purchases to the right job](/guides/how-to-charge-every-small-purchase-to-the-right-job) is that habit.