How do I track my own labor as the owner in job costs when I work in the field?
By the Truceipts team · Published · Updated
Clock yourself onto the job the same way a tech does, then cost those hours at a burdened owner-labor rate. An owner draw never tags the ticket. Hours that never hit a timesheet never allocate.
This is the click path for a 5-to-15 tech HVAC, plumbing, or electrical shop on Jobber, Housecall Pro, or Workiz where the owner still runs calls.
What has to be on before your hours can hit a job
Owner labor is hours on that ticket times a cost per hour. Missing either one leaves wrench time off the job.
| Setting | Where | What it does |
|---|---|---|
| You as a field user | The FSM team record | A visit timer or On my way / Start / Finish |
| Loaded labor cost on your user | Jobber Manage Team, Housecall Pro Pay, Workiz labor cost, or Employee hourly rate in QuickBooks | The dollars the report multiplies |
| One project per job | QuickBooks Online Plus | Customer/Project on the timesheet |
How to allocate technician labor hours is the tech version of this path. How to calculate the fully burdened labor rate is the sheet. Type a number for yourself the same way.
Clock the job, even when you are the owner
Assign yourself to the visit and start a job clock. Two people on one call are two lines.
Jobber. Gear, Manage Team, labor cost on your own user. Jobber’s job costing help (updated 2026-11-12) wants wage, benefits, and taxes in that number on Grow and Plus, applied to future timesheets once the visit timer stops. Timesheets help (updated 2026-10-29) puts visit time on the job and general time on the day.
Housecall Pro. Fully loaded rate on your team record. Housecall Pro’s job costing setup (dated 2026-07-22) multiplies that rate by time including travel once Travel and time on jobs is on. Tap On my way, Start, Finish. Time tracking overview (dated 2026-07-09) says travel and job time does not show in total clocked-in hours.
Workiz. Check Assign to jobs on your user. Save a labor cost per hour. Clock in, or Add time on the job. Workiz’s labor-cost article (read 2026-11-12) applies that rate to future jobs.
QuickBooks Online. Add a timesheet and pick the project in Customer/Project. Intuit’s labor-costing help (updated 2026-08-05) gives estimated hourly costs for shops without payroll. Salaried people still need timesheets. Rates apply only to time entered after you set them. Leave Billable off on flat-rate tickets.
What hours go on the job versus into overhead
| Hours | On the job? | If you leave them off |
|---|---|---|
| On-site wrench time you ran | Yes | The job looks fat |
| Drive to that ticket | Yes if the FSM tracks travel; else in the rate | Outlying calls look cheaper than they were |
| Quotes, dispatch, invoicing, Friday books | No. Overhead. Recover in the price book | Long jobs look worse for the wrong reason |
| Warranty callback you ran | Yes, on the original job | The first ticket keeps a false profit bar |
| Owner draw or owner paycheck | No. That is how you got paid | Hours still never allocate |
Julius T wrote on X on 2026-11-07 that a job cost rarely includes the owner’s own hours. Leo Szac wrote on 2026-11-09 that owner labor never shows on the books, then the first hire blows up the expense line. How do I know if a job made money keeps shop rent and owner draws off the job for the same reason.
The rate to type for yourself
Type a burdened rate.
| Rate | What you type | When it holds |
|---|---|---|
| Replacement | What you would pay a lead to run that call, burdened | You still wrench, and you want the job to survive when you stop |
| Take-home, burdened | Annual draw or W-2 pay, plus employer tax if you run payroll, plus your truck, divided by your field hours | You want the job to reflect what this shop actually paid you to be there |
The fully burdened labor sheet is the arithmetic. Divide by field hours that hit tickets, not by 2,080. A $0.01 rate, the workaround shops post on r/QuickBooks, gets hours onto a report without moving net profit. It does not cost the job.
| Line | Hours | Rate | Labor on the job |
|---|---|---|---|
| Owner, on site | 2.0 | $62 | $124 |
| Owner, drive | 0.5 | $62 | $31 |
| Helper, on site | 1.5 | $44 | $66 |
| Total labor | 4.0 | $221 | |
| Same job, owner hours at $0 | 1.5 | $44 | $66 |
The $155 gap is you. The profit bar without it is a quote.
Get the hours into QuickBooks if that is the report
The field-service app can show your labor on the job and still leave the books empty. Jobber’s new QuickBooks Online integration (updated 2026-10-29) syncs approved timesheets one way for payroll when names match and QuickBooks Payroll is on. It does not create a Project per ticket. Housecall Pro and Workiz keep labor inside the FSM.
One project per job, then a timesheet tagged to it. Intuit’s add-existing-timesheets help (updated 2026-08-04) picks the employee or vendor in Name and the project in Customer/Project. Estimated hourly costs are set per employee. Add yourself as a time-tracking employee, type the rate, enter the timesheet, and switch the project view to Hourly Costs. That switch does not change the books.
On r/QuickBooks, shops that set the owner up as an employee then ran payroll booked wages they never paid. On r/Bookkeeping in February 2025, an LLC owner on draws could not get those hours into job profitability. How to do job costing in QuickBooks Online is the setup. If you already take a W-2, tag the timesheet so payroll expenses can land after you run payroll.
Why owner hours still miss the job
An HVAC owner on r/QuickBooks wrote that they were horrible at clicking in, so they put a GPS tracker on their own truck and let the office read the hours later. Nick Buege, who runs a paving company, wrote on X on 2026-11-11 that 43 percent of their costed jobs had zero labor actuals.
A running Jobber visit timer shows a clock and no labor dollars until someone stops it. A Housecall Pro owner who clocks the day and never taps On my way leaves labor empty on the costing report. Timesheets that reach QuickBooks for payroll still sit under one customer if the integration never made a project per ticket.
Four ways shops actually cost owner field time
1. Clock yourself in the FSM you already pay for
Set a burdened rate on your own user. Assign yourself to the visit. Start the visit timer or On my way / Start / Finish. Stop it. Right answer when you already live in the app. It breaks the first week you skip Start.
2. Tag owner timesheets onto QuickBooks projects
Stay on Plus. One project per job. Add yourself as a time-tracking employee with an estimated hourly cost. Customer/Project on every owner timesheet the same week. Right answer when jobs last days and the books are the report. It fails when the FSM dumps every ticket onto one customer, and when you run a paycheck you never issued.
3. Switch to ServiceTitan
ServiceTitan’s Job Costing tool (updated 2026-10-15) breaks out labor pay, overtime, payroll adjustments, labor burden, and performance pay on the invoice. You need to exist as a technician on that invoice with a burden rate. Costing is by invoice. Technicians cannot see it in the mobile app. You replace the FSM you already run.
4. Use software that tags from the FSM and the timesheet
A newer set of tools leaves the FSM and QuickBooks in place and matches card swipes, supply-house bills, timecards, and sub invoices to a job using tech, time, address, and supplier. Anything they cannot place goes to a short exception list. We make Truceipts, which does this, so weigh that suggestion accordingly. Ask whether a tool only adds tags, and whether changes can be undone.
How to tell this week
You know owner labor is on the jobs when last week’s closed tickets you ran yourself show your hours at the burdened rate. If a job you wrenched shows revenue and no owner hours, the timer was never stopped.
Pull last week’s closed jobs from Jobber, Housecall Pro, or Workiz. Lay each one next to your timesheet, the tech timesheets, and the payroll register or the draw log. Those files already exist.
Frequently asked questions
Does an owner draw count as labor cost on a job?
No. A draw is how you take money out of the company. It sits on equity, or as owner pay on the P&L, and it is not tagged to a ticket. Job costing needs hours on that job times a rate. Clock the visit, then apply the rate. The draw can stay a draw.
Should I run payroll for myself just so owner hours show up in QuickBooks?
No, if you take a draw. Intuit's labor-costing help, updated 2026-08-05, lets you set an estimated hourly cost and cost timesheets without a payroll run. Switching a project to Hourly Costs does not change the books. Running a paycheck you never issued books wages you did not pay.
What hourly rate should I use for my own field hours?
A burdened rate, the same idea as a tech. Type what you would pay a lead to run that call, or build the rate from the fully burdened labor sheet using what you actually take in a year. A $0.01 rate hides the dollars. Two people on one call get two rates.
Should estimating and invoicing time go on the job?
No. Quotes, dispatch, invoicing, and Friday books are overhead. Recover them in the price book. Wrench time, drive to that address if the app tracks travel, and a warranty callback you ran yourself belong on the ticket. Mixing office hours onto every job makes long jobs look worse for the wrong reason.
Can Jobber or Housecall Pro cost my hours if I am the owner?
Yes, once you are a team user with a labor cost and you clock the visit. Jobber's job costing help, updated 2026-11-12, multiplies timesheets by each user's hourly cost on Grow and Plus. Housecall Pro's setup guide, dated 2026-07-22, multiplies a fully loaded rate by time including travel. Assign yourself to the job first.